What is Pod mod?

Which kind of vaping device do you prefer? Pod systems? Box mods? Pen style? Or Pod mods? Pod mods are getting very popular in the vaping world.

So what is pod mod ?

Pod mods are a type of electronic cigarette used to vape nicotine through a mouth piece connected to the body of the device with magnets. These devices are a newer generation of e-cigarettes that are often marketed to a younger crowd that do not wish to attract attention gained through regular e-cigarettes or traditional tobacco-burning cigarettes. Pod mods contain a disposable cartridge and have coils that cannot be removed or changed.

Pod mods were designed to provide higher nicotine delivery with a smaller amount of power than conventional e-cigarettes. Refillable pods can be filled with nicotine salts into empty cartridges with at varying levels of nicotine often at 2.5% and a maximum of 6.0%.


Science about pod mod

Co-founders at Solace recreated nicotine salts through a combination of various acids, eventually settling on benzoic acids although many types of acids may be used to created nicotine salts. According to The Verge the first company to utilize nicotine salts in e-liquids was BAT claiming to have used them since 2012 in various products. Traditional e-cigarettes use free-based nicotine liquids, whereas pod mods use nicotine salts which give them a larger dose of nicotine per inhalation. Head of scientific affairs at Imperial Brands Grant O’Connell suggests nicotine salts are stronger due to their ability to circulate the body faster from faster absorption in the lungs. Each milliliter of a pod that uses nicotine of 5% is equivalent to nicotine found in 20 traditional cigarettes. Nicotine salts are created with free base nicotine and benzoic acid to produce an ionized(+) solution that is less volatile- smaller clouds- and less harsh, often described as smooth in anecdotal research. Free-base nicotine found in e-cigarette juice and tobacco cigarettes often stick to the respiratory tract whereas nicotine salts are unlikely to, giving them the higher percentage of nicotine delivery.

The first to introduce pod mods was Pax Labs in June 2015, and since then many companies began introducing similar products.


Health about pod mod

As these devices are created with the intent of replicating smoke produced from traditional cigarettes, they produce greater levels of nicotine than e-cigarettes, however the health risks are currently undetermined as they are new productions. Research reveals potential health risks in aerosolizing nicotine salts and metal toxins that are produced. As there are a variety of different organic compounds put into different flavors, the health risks of these are also unknown and not well-studied. A study revealed that 80% of users ages 15-24 continually use the product after an initial trial as they do not have the adverse effects of traditional cigarettes; these sensations include a burning throat, the distasteful flavour of smoke and the smell left on the body afterward. However, pod mods and e-cigarettes take away some of the difficulties surrounding traditional cigarettes including no smoke, relatively cheaper than tobacco smoke and discrete, leaving a younger demographic more susceptible to addiction.


The difference from Box mod.

A. Tank pk Pod.

Pod mods are mods with a pod, and they are usually made of plastic. Pods could be made of just one piece where the drip tip is attached to the pod and it’s not replaceable. Moreover, there are also pods that allow some customization. For instance, you can replace the drip tips.

Box mod is a combination of a mod with a tank. This tank is usually threaded onto the mod with a 510 connection. Moreover, tanks could be made of acrylic or Pyrex glass, but the better quality ones are usually made of Pyrex glass


B. Customization.

Box mods can be combined with an RBA atomizer. In short, you can tinker with coils and wicks. Pod systems weren’t designed for this sort of customization. However, new pod mods have RBA pods like RBA atomizers.


C. Size

Pod mods are usually lighter and smaller than box mods. The fundamental difference was previously believed to be that box mods were designed for sub-ohm vaping. However, this is not the case anymore. Many pod mods can produce an output power of more than 60-80 watts, and they use sub-ohm coils.

However, pod mods are still sleeker, smaller, and more portable than box mods. In other words, pod mods are ideal vapes-on-the-go.

If you want to try an amazing pod mod, then you can start vaping the Artha pod mod.

Artha pod mod is very popular now due to its unique design.

  1. Artha pod mod uses a single 18650 battery which is not included. To access the battery and the pod the side cover is removable.
  2. This is a variable wattage device and you can select the desired power from 5-80W. Moreover, the system can automatically identify the resistance value of the atomizing core and recommend the appropriate output power.0.3 ohm coil system will recommend 30w and 0.8 ohm coil system will recommend 20w. You can fine-tune the recommended power to your preferred experience
  3. A 0.42in OLED screen located on the bottom will inform you of your vaping data. The adjustment buttons are located next to the screen on the base.
  4. The pod is basically a cartridge which you install into the side of the device which will hold up to 4.5ml of e-liquid. This is refillable by removing the side cover and filling plug covering the fill port.
  5. Last but not least, There is a 510 thread adaptor so that you could fill in the cartridge used or preferred by you.

In a one word, As the pod mod becomes more and more popular, the choice is still up to e-cigarette users.

We will be happy to hear your thoughts

Leave a reply

3 + 3 = ?

Are you 21 or older?

WARNING : To use the ADVKEN official website you must be aged 21 years or over. Please verify your age before entering the site.
Advken blog
Compare items
  • Cameras (0)
  • Phones (0)